Story· Everyday numbers
A million sheets of office paper make a stack 100 metres tall
Five hundred sheets of office paper make a 50 mm ream. A million make a tower of 100,000 millimetres, about as tall as a 30-storey building. Card stacks to over 300 metres.
Published · 4 min · By the Convert & Calculate team
Key takeaways
- One sheet of 80 gsm office paper is 100 µm thick, so 500 sheets make a ream 50.0 mm high.
- A million sheets stack 100,000.0 mm, or 100 metres, and an A4 stack that size weighs 4,989.600 kg.
- Heavier paper is thicker: a million sheets of 250 gsm card reach 312,500.0 mm, more than three times as tall.
From a ream to a tower
A ream of 80 gsm office paper holds 500 sheets and is 50.0 mm tall, about two inches. Each sheet is 100 µm thick, a tenth of a millimetre, roughly the width of a human hair. Multiply that by two thousand reams and you reach a million sheets.
We put a million sheets into our paper thickness calculator for four kinds of paper.
| Paper | Weight | Stack height |
|---|---|---|
| Newsprint | 45 gsm | 67,500.0 mm |
| Office paper | 80 gsm | 100,000.0 mm |
| Coated magazine paper | 115 gsm | 105,800.0 mm |
| Heavy card | 250 gsm | 312,500.0 mm |
Try it: Paper Thickness Calculator
Open the full toolYour details
Try an example
Result
Thickness of one sheet
100 µm
3.94 thou (mils) · 500 sheets stack 50.0 mm (1.97 in)
- One sheet
- 0.100 mm
- Stack height
- 50.0 mm
- Sheets per cm
- 100
Good to know: thickness = gsm × micrometres per gsm
The numbers behind this · totals, working, notes
- Sheets per inch
- 254
- Thickness in inches
- 0.0039 in
How it was worked out
thickness = gsm × micrometres per gsm
- 80 gsm × 1.25 µm per gsm = 100 µm per sheet
- 500 sheets × 0.100 mm = 50.0 mm
- The micrometres-per-gsm figures are typical values for each paper type (80 gsm office paper is about 100 µm). Real caliper varies by mill and finish: use the supplier's data when it matters. A stack is also slightly taller than the sum because of air between sheets.
Stack height for other numbers of sheets
Same paper.
| Sheets | Height (mm) | Height (in) |
|---|---|---|
| 1 | 0.1 | 0.00 |
| 10 | 1.0 | 0.04 |
| 50 | 5.0 | 0.20 |
| 100 | 10.0 | 0.39 |
| 250 | 25.0 | 0.98 |
| 500 | 50.0 | 1.97 |
| 1,000 | 100.0 | 3.94 |
| 5,000 | 500.0 | 19.69 |
How tall is 100 metres?
A stack of 100,000.0 mm is 100 metres. For comparison, the tower that houses Big Ben is about 96 metres high, so a million sheets of office paper would reach a little above it. The newsprint stack, at 67,500.0 mm, is about 68 metres.
The weight of the tower
Paper this tall is heavy. A million A4 sheets at 80 gsm weigh 4,989.600 kg, almost five tonnes, as our paper weight calculator shows. That is roughly the weight of an adult African elephant.
Why heavy paper stacks so much higher
Weight in gsm is mass per square metre, and a heavier sheet contains more fibre and is therefore thicker. Our estimate says 250 gsm card reaches 312,500.0 mm, 312.5 metres, more than three times the office-paper stack, even though each sheet weighs only about three times as much.
What this does not tell you
Real paper varies by maker, finish and how tightly it is pressed, so thickness is an estimate from a typical bulk value for each type. A real stack of a million sheets would also compress under its own weight.
Methodology
Heights come from our paper thickness calculator, which multiplies the number of sheets by an estimated sheet thickness based on gsm and paper type. The weight comes from the paper weight calculator. The height of the Big Ben tower is a widely published figure; we did not measure it.
Run your own numbers with the Paper Thickness Calculator tool.