Construction and DIY calculators
Measure once, buy the right amount. These calculators turn room and wall measurements into quantities of paint, tiles, flooring, concrete, bricks, blocks, plasterboard and gravel, and add a sensible waste allowance so you don't run short halfway through a job.
There are also calculators for stairs, roof pitch, fences and timber. They follow common trade rules of thumb, but your project may differ: check product labels, local building regulations and, for anything structural, a qualified professional.
Please note: Estimates only. Measure your actual space, buy a little extra, and check product labels, safety requirements and local building rules. Do not rely on this for structural or safety-critical work.
Start here
The construction tools people use most.
All 14 tools
Finishes
Masonry and groundwork
Structure and timber
Guides, stories and quizzes
- Guide· 4 minHow much concrete do you need for a slab?Multiply length × width × thickness in metres, then add 5 to 10%. A 4 m × 3 m slab, 10 cm thick, needs 1.2 m³ before the extra.Build and fix
- Guide· 3 minHow much extra tile and flooring should you buy?Add about 10% for a simple layout and 15% or more for a diagonal one, then round up to full boxes. These are rules of thumb, so lean higher for rooms with many corners.Build and fix
Questions people ask
How much extra material should I buy?
Around 10% is typical for tiles, flooring and plasterboard, and 5% for bricks and blocks. Allow more for diagonal layouts, rooms with many corners, or materials that can't be reordered in the same batch.
Should I deduct doors and windows?
The brick and block calculators let you subtract openings. For paint, wallpaper and the others, measure only the wall or floor area you will actually cover.
Can I use these results for structural work?
Use them for estimating quantities and budgets. Anything structural, such as beams, foundations or load-bearing walls, needs a qualified engineer or builder and must meet local building regulations.