Guide· Build and fix
How much extra tile and flooring should you buy?
Add about 10% for a simple layout and 15% or more for a diagonal one, then round up to full boxes. These are rules of thumb, so lean higher for rooms with many corners.
Published · 3 min · By the Convert & Calculate team
Try it: Tile Calculator
Open the full toolYour details
Try an example
Result
Tiles to order (+10% waste)
148
134 with no waste
- Room area
- 12.00 m²
- Tiles, no waste
- 134
- Extra for waste
- 14
Good to know: A 4 m × 3 m room with 30 cm tiles needs 134 tiles, or 148 with 10% waste.
How it was worked out · notes
- 10% waste suits simple layouts, 15% diagonal patterns. Round up to full boxes: enter tiles per box to see how many to buy.
Tiles to order by waste allowance
Simple layouts need about 10%; diagonal or patterned layouts about 15%. Your allowance is highlighted.
| Allowance | Tiles to order |
|---|---|
| 5% | 141 |
| 10% | 148 |
| 15% | 155 |
| 20% | 161 |
Which allowance to use
| Job | Allowance |
|---|---|
| Tile, simple layout | 10% |
| Tile, diagonal pattern | 15% |
| Flooring, straight lay | 5 to 10% |
| Flooring, diagonal lay | 15 to 20% |
Diagonal layouts cost more because nearly every edge piece is cut at an angle. Treat the table as a starting point, and move up a step for alcoves, pipes or several doorways.
A worked example
A 4 m × 3 m room is 12 m². With 30 cm × 30 cm tiles, the area alone needs 134 tiles. A 10% allowance raises that to 148, and 15% raises it to 155.
Larger tiles need fewer pieces but each cut wastes more. With 60 cm × 60 cm tiles, the same room needs 34 tiles, or 38 with 10% added. The calculator works from area and your allowance, and does not plan the cuts, so large formats in small rooms are worth a dry layout on the floor first.
Round up to full boxes
Tiles and flooring are usually sold by the box. If a box holds 12 tiles, 148 tiles means 12.33 boxes, so you buy 13. That gives 156 tiles, and the 8 spare cover later repairs.
Flooring works the same way
Flooring is sold by area, so add the allowance to the room area. A 5 m × 4 m room is 20 m², which becomes 22.00 m² with 10% and 24.00 m² with 20%. Buy everything from the same lot where you can, because colour can differ between batches.
Please note: Estimates only. Measure your actual space, buy a little extra, and check product labels, safety requirements and local building rules. Do not rely on this for structural or safety-critical work.
Run your own numbers with the Tile Calculator tool.