Guide· Measures across borders
Why a 1 TB drive shows as 931 GB
Nothing is missing. Drive makers count in thousands, while Windows counts in 1,024s, so the same bytes display as a smaller number.
Published · 3 min · By the Convert & Calculate team
Try it: Data Storage
Open the full toolEnter a value
Result
1 gigabyte =
1,000 MB
1 GB × 1,000 = 1,000 MB
Decimal units count in 1,000s; binary units (KiB, MiB, GiB) count in 1,024s
The working
- 1. Convert 1 GB to bytes: 1 × 1,000,000,000 = 1,000,000,000.
- 2. Convert to MB: 1,000,000,000 ÷ 1,000,000 = 1,000.
Good to know: A "500 GB" drive shows about 465.7 GiB in an operating system that counts in binary.
1 GB in every unit
GB to MB conversion table
| Gigabytes (1,000³ B) | Megabytes (1,000² B) |
|---|---|
| 1 GB | 1,000 MB |
| 2 GB | 2,000 MB |
| 5 GB | 5,000 MB |
| 10 GB | 10,000 MB |
| 20 GB | 20,000 MB |
| 50 GB | 50,000 MB |
| 100 GB | 100,000 MB |
| 250 GB | 250,000 MB |
| 500 GB | 500,000 MB |
| 1,000 GB | 1,000,000 MB |
Why a drive shows less than advertised
- A 500 GB drive shows as
- ≈ 465.7 GiB
- MP3 song
- ≈ 4 MB
- Phone photo
- ≈ 3 MB
- HD film
- ≈ 4 GB
The sum
A 1 TB drive holds 1,000,000,000,000 bytes. A binary gigabyte, properly called a gibibyte (GiB), is 1,073,741,824 bytes. Dividing one by the other gives 931.32, which is the "931 GB" you see.
The two systems have separate names. The NIST guide to binary prefixes records kibi, mebi and gibi, approved by the IEC in December 1998. Software that divides by 1,024 but still prints "GB" is where the confusion comes from.
What other drives show
| On the box | In binary units | Apparent gap |
|---|---|---|
| 256 GB | 238.42 GiB | 6.9% |
| 500 GB | 465.66 GiB | 6.9% |
| 1 TB | 931.32 GiB | 6.9% |
| 2 TB | 1.82 TiB | 9.1% |
| 4 TB | 3.64 TiB | 9.1% |
The gap grows with the unit. Each step up multiplies by 1,024 instead of 1,000, so terabyte figures look further apart than gigabyte figures.
Your computer may show something else
Apple's storage page says drive makers use decimal units, and lists binary reporting for iOS 10 and OS X Leopard or earlier. A Mac on a newer system can therefore show a figure close to the number on the box. Windows users typically see the 931 figure, as this Microsoft Q&A answer from an independent adviser explains.
When space really is missing
If your drive shows much less than the table above, units are not the whole story. Formatting, recovery partitions and the operating system all take real space, and a partition may be left unallocated. Check your system's disk management tool.
Run your own numbers with the Data Storage tool.