Guide· Build and fix
How to read a tape measure: inches to fractions
The smallest mark on most tape measures is 1/16 of an inch, which is 1.5875 mm. To read a decimal, multiply it by 16, round, and reduce the fraction.
Published · 4 min · By the Convert & Calculate team
Try it: Inches to Fraction Converter
Open the full toolYour details
Try an example
Result
Nearest fraction
1 3/16″
Exact: 1.18750 in is exactly 1 3/16″ · 30.16 mm
- Fraction
- 1 3/16″
- Decimal of that
- 1.18750
- Error
- +0.000 mm
Good to know: fraction = round(inches × denominator) ÷ denominator
How it was worked out · notes
- 18750 in × 16 = 19.000
- Round to the nearest whole: 19 → 19/16, reduced: 1 3/16
- Tape measures are usually marked to 1/16 inch and machinists' rules to 1/64. Round to the precision your tool can actually read.
Nearest fraction at each precision
The smaller the denominator, the larger the rounding error.
| Precision | Fraction | Error (inches) | Error (mm) |
|---|---|---|---|
| 1/2″ | 1″ | 0.18750 | 4.762 |
| 1/4″ | 1 1/4″ | 0.06250 | 1.588 |
| 1/8″ | 1 1/4″ | 0.06250 | 1.588 |
| 1/16″ | 1 3/16″ | 0.00000 | 0.000 |
| 1/32″ | 1 3/16″ | 0.00000 | 0.000 |
| 1/64″ | 1 3/16″ | 0.00000 | 0.000 |
| 1/128″ | 1 3/16″ | 0.00000 | 0.000 |
What the marks mean
A tape measure divides each inch into halves, quarters, eighths and sixteenths. The longest mark is the half-inch, the next is the quarter, then the eighth, and the shortest is the sixteenth. To read a measurement, count the sixteenths past the last whole inch, then reduce the fraction: 8/16 is 1/2, and 12/16 is 3/4.
From a decimal to a fraction
Multiply the decimal by the denominator you want, round to the nearest whole number, and put it over that denominator. For 0.3 inches at sixteenths: 0.3 × 16 = 4.8, which rounds to 5, so the answer is 5/16″. That is 0.3125 inches, so the fraction is 0.318 mm away from the decimal.
Numbers that are already sixteenths come out exactly. 1.1875 inches is 1 3/16″, and 0.4375 inches is 7/16″. A metric measurement works the same after converting: 6.35 mm is exactly 1/4″.
The sixteenths in millimetres
| Fraction | Decimal inches | Millimetres |
|---|---|---|
| 1/16″ | 0.0625 | 1.5875 |
| 1/8″ | 0.125 | 3.175 |
| 1/4″ | 0.25 | 6.35 |
| 3/8″ | 0.375 | 9.525 |
| 1/2″ | 0.5 | 12.7 |
| 3/4″ | 0.75 | 19.05 |
How much error is acceptable?
Rounding to the nearest sixteenth leaves an error of up to half a sixteenth, which is 1/32 inch or about 0.79 mm. That is fine for framing and woodwork. Use a finer fraction, such as 1/32 or 1/64, when the job needs a tighter fit, and only if your rule is marked that finely.
Adding lengths
Adding fractions of an inch is where mistakes creep in. 5′ 10 1/2″ plus 2′ 3 3/4″ is 8′ 2 1/4″: the inches add to 14 1/4, and 12 of them carry over to make another foot. The feet and inches calculator does the carrying for you.
Run your own numbers with the Inches to Fraction Converter tool.