Inches to Fraction Converter: Decimal Inches on the Tape Measure
0.3125 inches is 5/16.
A tape measure shows fractions of an inch, but plans and calipers often give decimals. Enter a decimal, choose the finest fraction your tape shows, and the converter returns the nearest fraction and the small error left over. The table converts five decimals to sixteenths.
Your details
Try an example
Result
Nearest fraction
1 3/16″
Exact: 1.18750 in is exactly 1 3/16″ · 30.16 mm
- Fraction
- 1 3/16″
- Decimal of that
- 1.18750
- Error
- +0.000 mm
Good to know: fraction = round(inches × denominator) ÷ denominator
How it was worked out · notes
- 18750 in × 16 = 19.000
- Round to the nearest whole: 19 → 19/16, reduced: 1 3/16
- Tape measures are usually marked to 1/16 inch and machinists' rules to 1/64. Round to the precision your tool can actually read.
Nearest fraction at each precision
The smaller the denominator, the larger the rounding error.
| Precision | Fraction | Error (inches) | Error (mm) |
|---|---|---|---|
| 1/2″ | 1″ | 0.18750 | 4.762 |
| 1/4″ | 1 1/4″ | 0.06250 | 1.588 |
| 1/8″ | 1 1/4″ | 0.06250 | 1.588 |
| 1/16″ | 1 3/16″ | 0.00000 | 0.000 |
| 1/32″ | 1 3/16″ | 0.00000 | 0.000 |
| 1/64″ | 1 3/16″ | 0.00000 | 0.000 |
| 1/128″ | 1 3/16″ | 0.00000 | 0.000 |
The idea behind it
The thinking behind the numbers
01Method
Multiply, round, reduce
Multiply the decimal by the denominator, round to a whole number, then reduce the fraction. 0.625 × 8 = 5, so 5/8.
02Precision
Match your tool
A tape measure reads 1/16, a woodworker's rule 1/32 and a machinist's rule 1/64. Finer fractions than your tool can read are false precision.
03Error
How far off is the nearest?
The calculator shows the rounding error in millimetres, so you can see if it matters for the job.
Five decimals as sixteenths of an inch
Common decimals land exactly on a sixteenth, while others, such as 0.7, fall between marks and leave a small error. Each row gives the nearest sixteenth.
| Decimal | Nearest fraction | Error |
|---|---|---|
| 0.3125 in | 5/16″ | +0.000 mm |
| 0.4375 in | 7/16″ | +0.000 mm |
| 1.1875 in | 1 3/16″ | +0.000 mm |
| 2.6 in | 2 5/8″ | +0.635 mm |
| 0.7 in | 11/16″ | −0.317 mm |
Fractions are rounded to the nearest sixteenth of an inch. Choose a finer denominator for more precision.
A decimal, a denominator
- Choose decimal to fraction, or fraction to decimal.
- Enter the measurement and the precision you can measure to.
- Read the nearest fraction and the error in mm.
- Compare other precisions in the table.
1.1875 inches
1.1875 inches is exactly 1 3/16 inches (30.16 mm). A reading of 1.19 rounds to 1 3/16 at 1/16 precision, an error of about 0.06 mm.
About this tool
Formula
fraction = round(inches × denominator) ÷ denominator
Rounding down instead of to the nearest mark
- Rounding to a finer fraction than your ruler shows.
- Forgetting to reduce the fraction (8/16 is 1/2).
- Reading the whole inches separately from the fraction.
- Mixing millimetres and inches.
Fraction conversion questions
How do you convert a decimal to a fraction of an inch?
Multiply the decimal by the denominator you want, such as 16, round to the nearest whole number and put it over that denominator. Then reduce the fraction.
How do you convert a decimal to a fraction of an inch?
Multiply the decimal by the denominator you want (such as 16), round to a whole number, put it over the denominator and reduce.
What is 0.625 inches as a fraction?
5/8 inch, because 0.625 × 8 = 5.
Which fraction should I use?
Match your tool: tape measures usually show 1/16, rulers for woodwork 1/32, and machinist's rules 1/64.
Learn more
Related tools
- Feet and Inches CalculatorAdd, subtract, multiply or divide lengths in feet and inches, with fractions, and see the result in every unit.
- Heightcm ↔ feet & inches ↔ meters
- LengthInches, feet, centimeters
- Pixels to Inches ConverterConvert pixels to inches, centimetres, millimetres and points at any resolution, or find the pixels needed for a print size.
How we calculate this
We use the standard published formula or definition for this calculation, and we show the working so you can check it.
Spotted a mistake? Tell us and we'll check it. How we check our calculators