Story· Everyday numbers
A 4,000-pixel photo prints 13 inches wide, or 56 inches, depending on one setting
A photo has a size in pixels but no fixed size on paper. Choose 300 dots per inch and 4,000 pixels cover 13.333 inches. Choose 72 and the same file stretches to 55.556.
Published · 4 min · By the Convert & Calculate team
Key takeaways
- The same 4,000-pixel-wide photo prints 6.667 inches wide at 600 dpi, 13.333 at 300, 26.667 at 150 and 55.556 at 72.
- Doubling the resolution halves the print size, because the same pixels are packed into half the width.
- Printers ask for 300 dpi for sharp close-up prints; large posters, seen from further away, often use 150 or less.
Pixels have no size until you give them one
A digital photo is a grid of pixels. How big it appears on paper depends on how many pixels you squeeze into each inch, a setting called dots per inch, or dpi (some software says PPI). The sum is simple: print width in inches equals pixels divided by dpi.
We took a photo 4,000 pixels wide, a common width for a 12-megapixel camera, and ran it through our pixels to inches converter at four resolutions.
| Resolution | Print width (inches) | Print width (cm) |
|---|---|---|
| 600 dpi | 6.667 | 16.93 |
| 300 dpi | 13.333 | 33.87 |
| 150 dpi | 26.667 | 67.73 |
| 72 dpi | 55.556 | 141.11 |
Try it: Pixels to Inches Converter
Open the full toolYour details
Try an example
Result
Print size
20.000 in
50.80 cm · 508.0 mm at 96 PPI
- Pixels
- 1,920
- Inches
- 20.000
- Centimetres
- 50.80
Good to know: inches = pixels ÷ PPI
How it was worked out · notes
inches = pixels ÷ PPI
- At 96 pixels per inch: 1,920 px = 20.0000 inches
- 1 inch = 2.54 cm = 25.4 mm = 72 points = 6 picas
- A pixel has no fixed physical size. Print size depends on the pixels per inch you print at: 300 PPI is the usual standard for photographs, and web design uses 96 CSS pixels per inch as a reference.
In every unit
At 96 pixels per inch.
| Unit | Value |
|---|---|
| Pixels | 1,920 |
| Inches | 20.000 |
| Centimetres | 50.800 |
| Millimetres | 508.000 |
| Points | 1,440.000 |
| Picas | 120.000 |
The same size at other resolutions
How many pixels the same physical length needs.
| PPI | Pixels |
|---|---|
| 72 | 1,440 |
| 96 | 1,920 |
| 150 | 3,000 |
| 300 | 6,000 |
| 600 | 12,000 |
Why 300 is the number people quote
At 300 dots per inch the dots are too small for the eye to pick out at reading distance, so the print looks continuous. That is why print shops ask for it. At 300 dpi our photo gives a 13.333 inch print, a little over 33 centimetres, wider than the short side of an A3 sheet.
When a lower number is fine
A poster is viewed from further back, so it can use fewer dots per inch. At 150 dpi the same file reaches 26.667 inches wide, and nobody notices at a few metres. At 72 dpi, the old screen convention, the photo stretches to 55.556 inches but looks soft up close.
A small screenshot is a small print
A phone screenshot 1,080 pixels wide covers only 3.600 inches at 300 dpi, about 9 centimetres. That is why a screenshot looks blurry when blown up to a poster: there are simply too few pixels to stretch.
What this does not tell you
The sums assume the pixels are sharp. A blurry or heavily compressed photo will not print well at any resolution, and printers differ in what they can reproduce. Treat the figures as a guide to the largest size that should look sharp.
Methodology
All figures come from our pixels to inches converter, which divides pixels by the chosen dots per inch and converts inches to centimetres at exactly 2.54 centimetres to the inch. The 300 dpi print standard is widely published by printers; we did not test any prints.
Run your own numbers with the Pixels to Inches Converter tool.