Water Hardness Calculator: How Hard Is Your Tap Water?
Calcium and magnesium decide the limescale.
Hard water carries dissolved calcium and magnesium, which leave limescale and affect soap. Enter the concentrations of each in milligrams per litre, or a hardness in another unit, and the calculator returns the total in several units and the class. The table classifies five typical waters.
Your details
Try an example
Result
Total hardness
141.1 mg/L as CaCO₃
Hard water · 8.2 grains per gallon · 7.9 °dH
- mg/L (ppm)
- 141.1
- Grains per gallon
- 8.2
- Class
- Hard
Good to know: hardness (mg/L as CaCO₃) = 2.497 × Ca + 4.118 × Mg
How it was worked out · notes
hardness (mg/L as CaCO₃) = 2.497 × Ca + 4.118 × Mg
- Ca: 40 × (100.09 ÷ 40.08) = 99.89
- Mg: 10 × (100.09 ÷ 24.31) = 41.18
- Total = 141.07 mg/L as CaCO₃
- Classes follow the common US Geological Survey scale: soft up to 60, moderately hard 61 to 120, hard 121 to 180, very hard above 180 mg/L as CaCO₃. Other countries draw the lines slightly differently.
- 'Ppm' for hardness conventionally means mg/L as calcium carbonate.
In every unit
Hardness expressed in each common unit.
| Unit | Value |
|---|---|
| mg/L as CaCO₃ (ppm) | 141.1 |
| Grains per US gallon (gpg) | 8.24 |
| German degrees (°dH) | 7.90 |
| French degrees (°fH) | 14.11 |
| English degrees (Clark, °e) | 9.90 |
| Millimoles per litre (mmol/L) | 1.41 |
Please note: For study and planning. Check calculations independently before using results with chemicals, electricity, pressure or machinery, and follow safety data sheets, manufacturer instructions and local regulations.
The idea behind it
The idea behind the water hardness calculator
01Hardness
Calcium and magnesium
Hardness is the combined effect of dissolved calcium and magnesium, expressed as the amount of calcium carbonate that would give the same effect.
02Units
Many scales, one quantity
Grains per gallon, German, French and English degrees and mg/L all measure the same thing, so converting between them is just a factor.
03At home
Limescale and lather
Hard water scales up kettles and heaters and makes soap work less well, which is why many homes use softeners or descalers.
Five waters from soft to very hard
Rainwater is almost mineral-free, while water from limestone and chalk areas can carry many times the calcium. Each row gives the total hardness and the class.
| Water | Calcium and magnesium (mg/L) | Total hardness | Class |
|---|---|---|---|
| Rainwater | 2 and 1 | 9.1 mg/L as CaCO₃ | Soft |
| Upland reservoir | 15 and 4 | 53.9 mg/L as CaCO₃ | Soft |
| Typical city supply | 40 and 10 | 141.1 mg/L as CaCO₃ | Hard |
| Chalk-area tap water | 100 and 15 | 311.5 mg/L as CaCO₃ | Very hard |
| Limestone spring | 180 and 40 | 614.2 mg/L as CaCO₃ | Very hard |
Illustrative concentrations; your supplier's water report gives the real figures. Classes follow the common scale from soft to very hard.
Calcium and magnesium concentrations
- Choose calcium and magnesium or a hardness figure.
- Enter the values you have, with their units.
- Read the total hardness as mg/L of calcium carbonate.
- See it in every unit and where it falls on the scale.
40 mg/L calcium and 10 mg/L magnesium
Water with 40 mg/L calcium and 10 mg/L magnesium has a hardness of 2.497 × 40 + 4.118 × 10 = 141 mg/L as CaCO₃, which is hard water and about 8.2 grains per gallon.
The formula and reference values
Formula
hardness (mg/L as CaCO₃) = 2.497 × Ca + 4.118 × Mg
Mixing hardness units
- Mixing US and imperial gallons for grains per gallon.
- Forgetting hardness is expressed as calcium carbonate.
- Using the calcium or magnesium figure as the total.
- Treating ppm and mg/L as different for water.
Hard water questions
What counts as hard water?
Commonly, over 120 mg/L as calcium carbonate is hard and over 180 is very hard. About 17 mg/L is one grain per US gallon.
What counts as hard water?
On a common US scale, up to 60 mg/L is soft, 61–120 moderately hard, 121–180 hard and above 180 very hard.
How many mg/L is one grain per gallon?
17.1 mg/L for the US gallon. The imperial (English) degree, based on the larger UK gallon, is 14.3 mg/L.
Why does hardness matter?
Hard water leaves limescale in kettles and pipes and reduces how well soap lathers. It is not a health risk.
Related tools
- PPM CalculatorConvert between parts per million, mg/L and percent.
- Concentration ConverterConvert between g/L, molarity, percent w/v, percent w/w, ppm and molality for a solution.
- Molar Mass CalculatorFind the molar mass of any compound from its formula and see the mass of each element.
- Moles CalculatorConvert between grams and moles, with particle count from Avogadro's constant.
How we calculate this
We use the standard published formula or definition for this calculation, and we show the working so you can check it.
Spotted a mistake? Tell us and we'll check it. How we check our calculators