Buffer pH Calculator: The Henderson-Hasselbalch Equation at Work
Resist the change.
A buffer holds its pH steady by pairing a weak acid with its conjugate base, and the Henderson-Hasselbalch equation predicts its pH from the pKa and the ratio of the two. Enter a pKa and the concentrations, and the calculator returns the pH and the effective range. The table shows five common buffer systems at the same base-to-acid ratio.
Your details
Try an example
Result
Buffer pH
4.94
[A⁻]/[HA] = 1.500
- pH
- 4.94
- pKa
- 4.76
- Base : acid
- 1.500
Good to know: pH = pKa + log₁₀([A⁻] ÷ [HA])
The numbers behind this · totals, working, notes
- Ka
- 1.738e-5
- Effective buffer range
- pH 3.76 to 5.76
- Within range?
- Yes: both forms are present in useful amounts
How it was worked out
pH = pKa + log₁₀([A⁻] ÷ [HA])
- Ratio base : acid = 1.5000
- pH = 4.760 + log₁₀(1.5000) = 4.936
- Valid when both concentrations are well above the ion concentration from water and not extremely dilute. A buffer works best within one pH unit of its pKa, and is strongest at a ratio of 1.
pH at other ratios
Henderson–Hasselbalch with the same pKa.
| [A⁻] : [HA] | pH | % as base |
|---|---|---|
| 0.01 | 2.76 | 1.0% |
| 0.1 | 3.76 | 9.1% |
| 0.25 | 4.16 | 20.0% |
| 0.5 | 4.46 | 33.3% |
| 1 | 4.76 | 50.0% |
| 2 | 5.06 | 66.7% |
| 4 | 5.36 | 80.0% |
| 10 | 5.76 | 90.9% |
| 100 | 6.76 | 99.0% |
Please note: For study and planning. Check calculations independently before using results with chemicals, electricity, pressure or machinery, and follow safety data sheets, manufacturer instructions and local regulations.
The idea behind it
How the buffer pH calculator works
01Buffer
A weak acid and its partner
A buffer holds a weak acid and its conjugate base together, so added acid or base is soaked up and the pH changes little.
02pKa
Pick a buffer near your target pH
A buffer works best within one pH unit of its pKa, where both forms are present in useful amounts.
03Ratio
Tenfold ratio, one pH unit
Each tenfold change in the base-to-acid ratio shifts the pH by exactly one. At a ratio of 1 the pH equals the pKa.
Five buffer systems, one base-to-acid ratio
A buffer works best within one pH unit of its pKa, so each system covers a different part of the scale. Here, each is mixed with 0.10 M acid and 0.15 M conjugate base, which raises the pH 0.18 above the pKa.
| Buffer system | pKa | Buffer pH | Effective range |
|---|---|---|---|
| Acetic acid and acetate | 4.76 | 4.94 | pH 3.76 to 5.76 |
| Carbonic acid and bicarbonate | 6.35 | 6.53 | pH 5.35 to 7.35 |
| Dihydrogen and hydrogen phosphate | 7.21 | 7.39 | pH 6.21 to 8.21 |
| Tris buffer | 8.07 | 8.25 | pH 7.07 to 9.07 |
| Ammonium and ammonia | 9.25 | 9.43 | pH 8.25 to 10.25 |
Standard pKa values at 25 °C; they shift with temperature and ionic strength.
pKa plus the base-to-acid ratio
- Choose what you want to find: pH, ratio or pKa.
- Enter the pKa of the weak acid, or the pH, as asked.
- Enter the concentrations of the acid and its conjugate base if needed.
- Read the result, the buffer range and the table of other ratios.
An acetate buffer with pKa 4.76
An acetate buffer (pKa 4.76) with 0.10 M acetic acid and 0.15 M acetate has a ratio of 1.5, so pH = 4.76 + log₁₀(1.5) = 4.94.
About this tool
Formula
pH = pKa + log₁₀([A⁻] ÷ [HA])
Choosing a buffer whose pKa is far from your target pH
- Swapping the acid and base in the ratio.
- Using a buffer far outside its pKa ± 1 range.
- Mixing concentration units between acid and base.
- Using the equation for very dilute solutions.
Buffer questions
When is the Henderson-Hasselbalch equation accurate?
For buffers where both the weak acid and its conjugate base are present at reasonable concentrations, and the pH is within about one unit of the pKa. It is less accurate in very dilute solutions.
What is the Henderson-Hasselbalch equation?
pH = pKa + log₁₀([A⁻] ÷ [HA]). It links a buffer's pH to the pKa of its weak acid and the ratio of conjugate base to acid.
When is a buffer most effective?
At a pH equal to the pKa, where acid and base are equal, and within about one unit either side of it.
How do I pick a buffer for a target pH?
Choose a weak acid whose pKa is within one unit of your target pH, then use the ratio mode to find the proportions.
Related tools
- Neutralization CalculatorFind how much base neutralises an acid, with the pH of the mixture and the pH curve.
- pH CalculatorConvert between pH, pOH, hydrogen and hydroxide ion concentration.
- Titration CalculatorFind the volume of base needed to neutralise an acid at the equivalence point.
- Molar Mass CalculatorFind the molar mass of any compound from its formula and see the mass of each element.
How we calculate this
We use the standard published formula or definition for this calculation, and we show the working so you can check it.
Spotted a mistake? Tell us and we'll check it. How we check our calculators