Neutralization Calculator: Base Needed and the pH After Mixing
Match the moles of H⁺ and OH⁻.
An acid and a base neutralise each other when the moles of hydrogen ions equal the moles of hydroxide ions. Enter the acid's strength, volume and protons, and the base's strength, and the calculator gives the volume of base needed and the pH after any amount added. The table compares five acid and base pairs.
Your details
Try an example
Result
Base needed to neutralise
25 mL
0.0025 mol of H⁺ needs 0.0025 mol of base · after 20 mL the pH is 1.95 (acid still in excess)
- Moles of H⁺
- 0.0025
- Base needed
- 25 mL
- pH of mixture
- 1.95
Good to know: moles H⁺ = moles OH⁻ at the equivalence point
How it was worked out · notes
- Moles of H⁺ = 0.1 × 25 mL ÷ 1000 × 1 = 0.0025 mol
- Base volume = moles of H⁺ ÷ (0.1 × 1) = 25 mL
- pH of the mixture = from the excess H⁺ or OH⁻ in the combined volume
- For a strong acid with a strong base at 25 °C. Weak acids or bases have a different curve and a pH above or below 7 at equivalence: use the titration and buffer tools for those.
pH along the way
Strong acid with strong base.
| Base added (mL) | Share of equivalence | pH |
|---|---|---|
| 0 | 0% | 1.00 |
| 6.25 | 25% | 1.22 |
| 12.5 | 50% | 1.48 |
| 22.5 | 90% | 2.28 |
| 24.75 | 99% | 3.30 |
| 25 | 100% | 7.00 |
| 25.25 | 101% | 10.70 |
| 27.5 | 110% | 11.68 |
| 37.5 | 150% | 12.30 |
| 50 | 200% | 12.52 |
Please note: For study and planning. Check calculations independently before using results with chemicals, electricity, pressure or machinery, and follow safety data sheets, manufacturer instructions and local regulations.
The idea behind it
The idea behind the neutralization calculator
01Equivalence
Moles of H⁺ equal moles of OH⁻
Neutralisation is complete when the acid's hydrogen ions and the base's hydroxide ions are present in equal amounts.
02Stoichiometry
Count H⁺ and OH⁻ per formula
Sulfuric acid gives two H⁺ per molecule and calcium hydroxide two OH⁻ per unit, which changes how much you need.
03pH jump
A sharp rise near equivalence
The pH changes very little at first, then leaps across 7 within a drop or two of the equivalence point. That is what indicators detect.
Five acid and base pairs, with 20 mL of base added
A two-proton acid needs twice the base of a one-proton acid. With 20 mL of base added to 25 mL of acid, the mixture is still acidic in most rows.
| Acid and base | Base needed | pH after 20 mL of base |
|---|---|---|
| 0.1 M HCl with 0.1 M NaOH | 25 mL | 1.95 |
| 0.1 M H₂SO₄ with 0.1 M NaOH | 50 mL | 1.18 |
| 0.1 M HCl with 0.05 M Ca(OH)₂ | 25 mL | 1.95 |
| 0.05 M HCl with 0.2 M NaOH | 6.25 mL | 12.79 |
| 0.2 M HCl with 0.1 M NaOH | 50 mL | 1.18 |
Treats strong acids and bases as fully dissociated and assumes volumes add.
Acid, base and how much has been added
- Enter the acid concentration, volume and the number of H⁺ per molecule.
- Enter the base concentration and OH⁻ per unit.
- Optionally enter the base added so far for the mixture's pH.
- Read the volume needed and the pH curve.
Neutralising 25 mL of hydrochloric acid
25 mL of 0.10 M HCl has 0.0025 mol of H⁺ and needs 25 mL of 0.10 M NaOH. After adding 20 mL of base the pH is 1.95 and acid is still in excess.
About this tool
Formula
moles H⁺ = moles OH⁻ at the equivalence point
Ignoring how many ions each molecule releases
- Ignoring that H₂SO₄ gives two H⁺ and Ca(OH)₂ gives two OH⁻.
- Mixing mL and litres.
- Assuming the pH at equivalence is 7 for a weak acid.
- Forgetting the volume of the base when finding the final pH.
Acid and base questions
What is the pH at neutralization?
7 at 25 °C for a strong acid with a strong base. A weak acid with a strong base ends above 7, and a strong acid with a weak base below 7.
How do you calculate how much base neutralises an acid?
Find the moles of H⁺ (concentration × volume × H⁺ per molecule), then divide by the base's concentration × OH⁻ per unit to get the volume.
Is the pH always 7 at neutralization?
Only for a strong acid with a strong base. A weak acid with a strong base ends above 7, and a strong acid with a weak base ends below 7.
Does this work for weak acids?
Only the amount of base needed does. The pH curve here is for strong acid with strong base, so use the buffer and titration tools for weak acids.
Related tools
- Buffer pH Calculator (Henderson-Hasselbalch)Find a buffer's pH, the acid-to-base ratio for a target pH, or an acid's pKa.
- pH CalculatorConvert between pH, pOH, hydrogen and hydroxide ion concentration.
- Titration CalculatorFind the volume of base needed to neutralise an acid at the equivalence point.
- Molar Mass CalculatorFind the molar mass of any compound from its formula and see the mass of each element.
How we calculate this
We use the standard published formula or definition for this calculation, and we show the working so you can check it.
Spotted a mistake? Tell us and we'll check it. How we check our calculators