Skip to content
Convert. Calculate.

Curtain Fabric Calculator: Widths, Drop and Total Length

Fullness is what makes curtains look right.

Curtains need far more fabric than the width of the window: twice the track width for a standard look, more for a luxurious one.

Your details

Try an example

Units

Result

Fabric to buy

7.35 m

3 widths of fabric, each cut 245 cm long · 8.04 yards

Widths of fabric
3
Cut length
245 cm
Fabric (yd)
8.04
Image

Good to know: fabric width = rod width × fullness

The numbers behind this · totals, working, notes
Fabric width needed
360 cm
For a pair, each curtain
2 widths

How it was worked out

  1. Fabric width needed = rod width × fullness = 180 cm × 2 = 360 cm
  2. Widths = 360 cm ÷ 140 cm = 3 (rounded up)
  3. Cut length = drop + heading + hem = 220 cm + 10 cm + 15 cm = 245 cm
  • Fullness is how much wider the fabric is than the rod. For a pair, split the widths between the two curtains and add side hems. Patterned fabric needs extra to match the repeat.

The effect of fullness

Same rod, drop and fabric.

FullnessWidthsFabric (m)
1.5×24.90
2×37.35
2.5×49.80

The idea behind it

Three ideas that explain the curtain size calculator

  • 01Fullness

    Wider than the rod

    Curtains are made 1.5 to 2.5 times the rod width so they fall in folds. Twice the width is standard.

  • 02Allowances

    Heading and hem

    Each drop needs extra for the top heading and the bottom hem, on top of the measured length.

  • 03Widths

    Fabric comes in fixed widths

    Divide the width you need by the fabric's width and round up to get the number of widths to buy.

Five windows, five fabric orders

A wide patio door needs many widths of fabric, which is why made-to-measure curtains can be expensive. Each row uses double fullness, a 4 cm heading, a 6 cm hem and 140 cm wide fabric.

Five windows, five fabric orders
WindowTrack width and drop (cm)Widths of fabricFabric to buy
Small bathroom window80 × 10022.20 m
Bedroom window150 × 16035.10 m
Large living room window220 × 20048.40 m
Patio doors300 × 230512.00 m
Floor-to-ceiling wall of glass450 × 260718.90 m

Illustrative windows. Patterned fabric needs extra for matching, and lined or interlined curtains need lining fabric on top.

Track width, drop and fullness

  1. Choose centimetres or inches and measure the rod or track width.
  2. Choose the fullness and measure the drop.
  3. Enter the heading and hem allowances and the fabric width.
  4. Read the widths of fabric and the total to buy.

A 72-inch track with a 87-inch drop

A 180 cm rod at 2× fullness needs 360 cm of fabric, which is 3 widths of 140 cm fabric. With a 220 cm drop plus heading and hem, each is cut 245 cm and you buy 7.35 metres.

The formula and reference values

Formula

fabric width = rod width × fullness

Measuring the window instead of the track

  • Measuring the window instead of the rod or track.
  • Forgetting the heading and hem allowances.
  • Not rounding the fabric widths up.
  • Ignoring pattern repeats.

Curtain questions

How wide should curtains be?

Between 1.5 and 2.5 times the width of the rod, so that they hang in folds when closed. Twice the width is the standard.

How wide should curtains be?

Between 1.5 and 2.5 times the width of the rod. Twice the width is standard and gives soft folds when closed.

How long should curtains be?

To the sill, just above the floor, or touching the floor. Measure from the rod to your chosen point, then add heading and hem allowances.

How do I split fabric for a pair?

Divide the number of widths between the two curtains. Odd numbers need a half width, so some people round up to an even number.

Related tools

How we calculate this

We use the standard published formula or definition for this calculation, and we show the working so you can check it.

Spotted a mistake? Tell us and we'll check it. How we check our calculators