Skip to content
Convert. Calculate.

Fabric Calculator: How Much Material for Your Sewing Project?

Pieces, widths and a cushion for mistakes.

Buying fabric by the metre means working out how many pattern pieces fit across the width of the roll and how many rows you need.

Your details

Try an example

Units

Result

Fabric to buy

2.31 m

2.53 yards · 2 pieces across 140 cm fabric, 3 rows

Metres
2.31
Yards
2.53
Pieces per row
2
How the pieces sit across the fabric width
140 cm fabric width3 rows × 70 cm
Image

Good to know: length = rows of pieces × piece length × (1 + allowance)

The numbers behind this · totals, working, notes
Before the extra allowance
2.10 m
Rows of pieces
3
Fabric width used
71%

How it was worked out

  1. Pieces across the width = 140 cm ÷ 50 cm = 2 (rounded down)
  2. Rows = 6 ÷ 2 = 3 (rounded up); length = 3 × 70 cm
  3. Add 10% for mistakes: 2.31 m
  • Add more for patterns that must match, a one-way nap or stripes. Fabric shrinks in the first wash, so many sewists buy 5 to 10% extra for that too. Seam allowances need to be included in the piece size.

Fabric for other numbers of pieces

Same piece size and fabric width. Your number is highlighted.

PiecesFabric (m)Fabric (yd)
10.770.84
20.770.84
41.541.68
62.312.53
83.083.37
103.854.21
124.625.05
207.708.42

The idea behind it

The idea behind the fabric calculator

  • 01Layout

    How many fit across

    Divide the fabric width by the piece width and round down. The number of rows follows from the pieces left.

  • 02Allowance

    A margin for mistakes

    Around 10% extra covers cutting errors and small shrinkage. Add more for patterns that must match.

  • 03Direction

    Nap and pattern matter

    Velvet, corduroy and one-way prints must all be cut in one direction, which can use more fabric.

Five small projects, five fabric orders

Wide fabric holds several pieces per row, so the length you buy grows more slowly than the number of pieces. Each row uses 140 cm wide fabric and a 10 per cent allowance.

Five small projects, five fabric orders
ProjectPiece size and count (cm)Fabric to buyPieces per row
Six napkins45 × 45, 60.99 m3
Two cushion covers50 × 50, 41.10 m2
Four tote bags40 × 45, 81.49 m3
Six tea towels50 × 70, 62.31 m2
Eight placemats35 × 45, 80.99 m4

Illustrative projects with seam allowances included in the piece size. Directional prints and patterns need more fabric.

Piece size, count and fabric width

  1. Choose centimetres or inches.
  2. Enter the piece width and length, and the number of pieces.
  3. Enter the fabric width and an extra allowance.
  4. Read the metres and yards to buy.

Six 20 by 28 cm pieces

Six pieces of 50 × 70 cm on 140 cm fabric fit two across, in three rows, which is 210 cm. With 10% extra, buy 2.31 metres.

Method and reference points

Formula

length = rows of pieces × piece length × (1 + allowance)

Ignoring pattern matching and the grain

  • Forgetting seam allowances in the piece size.
  • Ignoring the direction of the pattern or nap.
  • Not adding a margin for mistakes.
  • Using the label's usable width when selvedges reduce it.

Fabric buying questions

How much fabric do I need?

Divide the fabric width by the piece width to see how many fit across, divide the number of pieces by that for the rows, multiply by the piece length, and add 10% or so for mistakes.

How much fabric do I need?

Divide the fabric width by the piece width to see how many fit across, divide the pieces by that for the number of rows, and multiply by the piece length. Add about 10%.

How do I convert metres to yards?

Divide metres by 0.9144. 2.31 metres is 2.53 yards. The calculator shows both.

Does fabric shrink?

Often, in the first wash. Many sewists buy 5 to 10% extra, or pre-wash before cutting.

Related tools

How we calculate this

We use the standard published formula or definition for this calculation, and we show the working so you can check it.

Spotted a mistake? Tell us and we'll check it. How we check our calculators