Electrolysis Calculator: How Much Metal Does a Current Deposit?
Faraday's laws, in grams.
In electrolysis, the mass of a substance produced at an electrode depends on the current, the time and the number of electrons each ion carries. Enter the metal, the electrons per ion, the current and the time to get the mass deposited. The table compares five metals plated for one hour at the same current.
Your details
Try an example
Result
Mass deposited
2.371 g
0.03731 mol from 7,200 coulombs
- Mass
- 2.371 g
- Charge passed
- 7,200 C
- Moles of substance
- 0.03731
Good to know: m = (I × t × M) ÷ (n × F)
The numbers behind this · totals, working, notes
- Rate
- 2.371 g per hour
- Time
- 1.00 h
- Molar mass used
- 63.546 g/mol
How it was worked out
m = (I × t × M) ÷ (n × F)
- Charge Q = I × t = 2 A × 3,600.0 s = 7,200 C
- Moles of electrons = Q ÷ F = 7,200 ÷ 96485 = 0.074623 mol
- Moles of substance = 0.074623 × 1 ÷ 2 = 0.037311 mol
- Mass = 0.037311 × 63.546 = 2.371 g
- Faraday constant F = 96,485 C per mole of electrons. Real cells lose some current to side reactions, so set the efficiency below 100% if you know it (electroplating is often 90 to 98%).
Mass at other times
Same current, substance and efficiency.
| Time | Mass (g) | Charge (C) |
|---|---|---|
| 15.0 min | 0.5927 | 1,800 |
| 30.0 min | 1.185 | 3,600 |
| 1.00 h | 2.371 | 7,200 |
| 2.00 h | 4.742 | 14,400 |
| 4.00 h | 9.484 | 28,800 |
| 8.00 h | 18.97 | 57,600 |
| 24.00 h | 56.9 | 172,800 |
Please note: For study and planning. Check calculations independently before using results with chemicals, electricity, pressure or machinery, and follow safety data sheets, manufacturer instructions and local regulations.
The idea behind it
The thinking behind the numbers
01Charge
Current times time
The charge that passes is the current in amperes multiplied by the time in seconds, measured in coulombs.
02Faraday
One mole of electrons is 96,485 coulombs
Divide the charge by the Faraday constant to find the moles of electrons, then use the electrons per ion to find moles of metal.
03Efficiency
Real cells waste some current
Side reactions mean slightly less metal is deposited than the ideal figure. Plating baths are often tuned to be over 90% efficient.
Five metals, one hour at 2 amps
More electrons per ion means less mass per coulomb, while a heavier atom means more. Silver, with just one electron per ion, plates the most mass in the same time at the same current.
| Metal | Electrons per ion | Mass deposited in 1 hour |
|---|---|---|
| Aluminium | 3 | 0.67116 g |
| Zinc | 2 | 2.4394 g |
| Copper | 2 | 2.371 g |
| Gold | 3 | 4.8995 g |
| Silver | 1 | 8.0496 g |
Assumes 100% efficiency. In practice side reactions and poor contact lower the mass, and aluminium cannot be plated from water at all.
Substance, electrons, current and time
- Choose mass deposited or time needed.
- Enter the substance's symbol and the electrons per ion.
- Enter the current and time (or the mass wanted).
- Read the mass, charge and moles, and compare other times in the table.
Copper at 2 A for an hour
2 A for 1 hour passes 7,200 C. Copper (n = 2, 63.55 g/mol) deposits 7,200 ÷ 96,485 ÷ 2 × 63.55 = 2.37 g.
How the figures are built
Formula
m = (I × t × M) ÷ (n × F)
Forgetting to count electrons per ion
- Using the wrong number of electrons per ion.
- Entering minutes where hours are chosen.
- Assuming 100% current efficiency in a real cell.
- Using the atomic mass of the wrong element.
Electroplating questions
How do you calculate the mass deposited in electrolysis?
Multiply the current by the time to get the charge, divide by the Faraday constant to get moles of electrons, divide by the electrons per ion, then multiply by the molar mass.
What is Faraday's first law?
The mass of a substance deposited at an electrode is proportional to the charge passed through the cell, which is current multiplied by time.
What is the Faraday constant?
96,485 coulombs per mole of electrons: the charge carried by one mole of electrons.
Why is the actual mass lower than calculated?
Some current drives side reactions, such as releasing hydrogen, so the current efficiency is below 100%. Enter it to correct the result.
Related tools
- Nernst Equation Calculator (Cell EMF)Find the standard and actual cell potential of a galvanic cell, with ΔG and the equilibrium constant.
- Moles CalculatorConvert between grams and moles, with particle count from Avogadro's constant.
- Molar Mass CalculatorFind the molar mass of any compound from its formula and see the mass of each element.
- Molarity CalculatorCalculate molarity, moles of solute or solution volume.
How we calculate this
We use the standard published formula or definition for this calculation, and we show the working so you can check it.
Spotted a mistake? Tell us and we'll check it. How we check our calculators