Skip to content
Convert. Calculate.

Nernst Equation Calculator: Cell Potential Under Real Conditions

Standard potentials, corrected for concentration.

A galvanic cell's voltage depends on the metals used and, through the Nernst equation, on the concentrations of the ions.

Your details

Try an example

Result

Cell potential E

1.100 V

Standard E° = 1.100 V · 2 electrons transferred · spontaneous as written

E° (standard)
1.100 V
ΔG
-212.3 kJ/mol
Q
1
Cell potential falls as the reaction quotient Q grows
0.89411.11.211.32-6-3036Youlog₁₀ QE, volts
Image

Good to know: E = E° − (RT / nF) × ln Q

The numbers behind this · totals, working, notes
Equilibrium constant K
1.541e37
Electrons n
2
Nernst slope
29.6 mV per tenfold change in Q

How it was worked out

E = E° − (RT / nF) × ln Q

  1. E° = E°(cathode) − E°(anode) = 0.34 − (-0.76) = 1.100 V
  2. Electrons transferred n = 2; Q = [Zinc ion]^1 ÷ [Copper ion]^1 = 1
  3. E = 1.100 − (8.314462618 × 298.15 ÷ (2 × 96485)) × ln 1 = 1.1000 V
  4. ΔG = −nFE = -212.27 kJ per mole of reaction
  • Standard reduction potentials at 25 °C against the standard hydrogen electrode (rounded to 0.01 V). Concentrations are used in place of activities, so results are approximate for strong solutions.
  • Choose the half-cell with the higher potential as cathode: if E° comes out negative, swap the two.

Potential at other values of Q

Same cell and temperature. Positive means the reaction goes forward as written.

QE (V)Direction
0.0011.189Forward
0.011.159Forward
0.11.130Forward
11.100Forward
101.070Forward
1001.041Forward
1,0001.011Forward

Please note: For study and planning. Check calculations independently before using results with chemicals, electricity, pressure or machinery, and follow safety data sheets, manufacturer instructions and local regulations.

The idea behind it

The idea behind the Nernst equation calculator

  • 01E°

    Standard potential sets the starting voltage

    The cell's standard potential is the cathode's reduction potential minus the anode's. It applies when all concentrations are 1 mol/L.

  • 02Q

    Concentrations shift the voltage

    As the reaction proceeds, Q grows and the voltage falls. At equilibrium Q equals K and the cell potential is zero.

  • 03ΔG

    Voltage is free energy per charge

    ΔG = −nFE. A positive cell potential means a negative ΔG, so the reaction is spontaneous and can drive current.

Five classic cells at 1 M

The further apart two metals sit in the reactivity series, the larger the voltage. A zinc and silver cell delivers about two and a half times the voltage of a lead and zinc cell.

Five classic cells at 1 M
CellStandard potentialCell potentialFree energy change
Daniell cell: copper and zinc1.100 V1.100 V-212.3 kJ/mol
Silver and copper0.460 V0.460 V-88.8 kJ/mol
Copper and iron0.780 V0.780 V-150.5 kJ/mol
Silver and zinc1.560 V1.560 V-301.0 kJ/mol
Lead and zinc0.630 V0.630 V-121.6 kJ/mol

Standard electrode potentials at 25 °C; concentrations are set to 1 M so the cell potential equals the standard value.

Choose the metals and the concentrations

  1. Choose the cathode and anode metals.
  2. Enter the concentration of each metal ion in its half-cell.
  3. Enter the temperature.
  4. Read the cell potential, ΔG and K, and the plot against Q.

A copper and zinc cell at 1 M

A zinc–copper cell with both ions at 1 mol/L has E° = 0.34 − (−0.76) = 1.100 V, 2 electrons transferred and ΔG = −212 kJ/mol.

How the figures are built

Formula

E = E° − (RT / nF) × ln Q

Swapping the anode and cathode

  • Choosing the cathode and anode the wrong way round.
  • Using the wrong number of electrons.
  • Putting the products over the reactants in Q the wrong way.
  • Using the Nernst equation at temperatures where potentials are not tabulated.

Cell questions

What does a positive cell potential mean?

That the reaction as written is spontaneous and can drive current. A negative value means the reverse reaction is the one that goes.

What is the Nernst equation?

E = E° − (RT/nF) × ln Q. It gives the cell potential under any concentrations, from the standard potential, the temperature and the reaction quotient.

How do I choose the cathode?

The half-cell with the higher standard reduction potential is the cathode. If E° comes out negative, swap them.

What does a negative ΔG mean?

A negative ΔG (positive E) means the reaction is spontaneous as written and can do electrical work.

Related tools

How we calculate this

We use the standard published formula or definition for this calculation, and we show the working so you can check it.

Spotted a mistake? Tell us and we'll check it. How we check our calculators