Arrhenius Equation Calculator: How Temperature Speeds a Reaction
Heat it up and the rate climbs exponentially.
The Arrhenius equation links a reaction's rate constant to the temperature and the activation energy, and it explains why a small rise in temperature can make a reaction much faster. Enter the pre-exponential factor, the activation energy and a temperature to get the rate constant. The table shows one reaction at five temperatures.
Your details
Try an example
Result
Rate constant k
173.93
At 25 °C with Ea = 50 kJ/mol · rate rises 1.92× per 10 K
- k
- 173.9
- Ea
- 50 kJ/mol
- Rate rise per 10 K
- 1.92×
Good to know: k = A × e^(−Ea / RT)
How it was worked out · notes
k = A × e^(−Ea / RT)
- T = 298.15 K, Ea = 50,000 J/mol, R = 8.314462618
- Exponent = −Ea ÷ RT = -20.1698
- k = 100,000,000,000 × e^-20.1698 = 173.93
- Temperatures are converted to kelvin. The units of k follow the units of A (or k₁). Assumes Ea does not change over the temperature range.
k at other temperatures
Same activation energy. Your temperature is highlighted.
| Temperature (K) | k | Relative to yours |
|---|---|---|
| 278.2 | 40.79 | 0.235× |
| 288.2 | 86.37 | 0.497× |
| 293.2 | 123.3 | 0.709× |
| 298.2 | 173.9 | 1.000× |
| 303.2 | 242.6 | 1.395× |
| 308.2 | 334.7 | 1.924× |
| 318.2 | 618.1 | 3.554× |
Please note: For study and planning. Check calculations independently before using results with chemicals, electricity, pressure or machinery, and follow safety data sheets, manufacturer instructions and local regulations.
The idea behind it
Why the Arrhenius equation calculator gives the answer it does
01Activation energy
The energy hill
Molecules need a minimum energy, the activation energy, to react. A higher temperature means more of them clear the barrier.
02Exponential
Small temperature rises matter
Because the rate depends on e raised to a power that includes 1/T, a few degrees can change the rate by a large factor.
03Arrhenius plot
Straight line of ln k against 1/T
Plot ln k against 1/T from several measurements. The slope is −Ea/R, which is how activation energies are found in the lab.
One reaction at five temperatures
With an activation energy of 50 kJ/mol, the rate constant at body temperature is about 2.2 times its room-temperature value, and at 100 °C it is over 300 times its value at freezing.
| Setting | Temperature | Rate constant k | Rise per 10 K |
|---|---|---|---|
| Freezing | 0 °C | 27.457 | 2.18× |
| Fridge | 5 °C | 40.788 | 2.12× |
| Room | 25 °C | 173.93 | 1.92× |
| Body | 37 °C | 379.57 | 1.83× |
| Boiling water | 100 °C | 10,023 | 1.52× |
Illustrative A and Ea. The rule of thumb that rates double every 10 °C is only approximate and depends on the activation energy.
Activation energy and temperature
- Choose what to find: k, activation energy, or k at a new temperature.
- Pick °C or kelvin for the temperatures.
- Enter the values the form asks for.
- Read the result, the plot and the table of other temperatures.
50 kJ/mol at 25 °C
With A = 1 × 10¹¹, Ea = 50 kJ/mol and T = 25 °C (298.15 K), k = 1 × 10¹¹ × e^(−20.17) ≈ 174. Rates here rise 1.92× for every 10 K.
The formula and reference values
Formula
k = A × e^(−Ea / RT)
Using Celsius in the exponential
- Using °C in the formula instead of kelvin.
- Entering Ea in joules when kilojoules are asked.
- Taking the rate rule of 'doubling per 10 °C' as exact.
- Using two data points when more are available.
Kinetics questions
Why do reactions go faster when it is hotter?
More molecules have at least the activation energy at a higher temperature, so a larger share of collisions react. A common rule of thumb is that rates roughly double for every 10 °C rise.
What is the Arrhenius equation?
k = A × e^(−Ea/RT), where k is the rate constant, A the pre-exponential factor, Ea the activation energy, R the gas constant and T the temperature in kelvin.
How do I find the activation energy from two rates?
Use Ea = R × ln(k₂/k₁) ÷ (1/T₁ − 1/T₂). The calculator does this and also draws the Arrhenius plot.
Does the rate really double every 10 degrees?
It is only a rough guide. The factor depends on the activation energy and the temperature, and is usually between about 1.5 and 3.
Related tools
- Gibbs Free Energy CalculatorCalculate ΔG from ΔH, ΔS and temperature, and see whether the reaction is spontaneous and at what temperature it switches.
- Equilibrium Constant CalculatorFind Kc and Kp from equilibrium concentrations, or compare Q with K to see which way a reaction shifts.
- Nernst Equation Calculator (Cell EMF)Find the standard and actual cell potential of a galvanic cell, with ΔG and the equilibrium constant.
- Michaelis-Menten CalculatorCalculate an enzyme's reaction rate from Vmax, Km and substrate concentration, or the substrate needed for a rate.
- Linear Regression CalculatorFit a least-squares line to data and predict values.
- Half-Life CalculatorFind amount remaining, time elapsed or half-life for radioactive decay and other first-order processes.
How we calculate this
We use the standard published formula or definition for this calculation, and we show the working so you can check it.
Spotted a mistake? Tell us and we'll check it. How we check our calculators