Michaelis-Menten Calculator: How Fast Does an Enzyme Work?
Rate climbs with substrate, then levels off.
Enzymes speed up reactions, but only so fast: as substrate concentration rises, the rate climbs towards a ceiling called Vmax. The Michaelis constant Km marks the concentration at which the rate is half that. Enter Vmax, Km and the substrate concentration to get the rate. The table shows five concentrations.
Your details
Try an example
Result
Reaction rate v
66.667
66.7% of Vmax at [S] = 4 (2.00 × Km)
- v
- 66.67
- % of Vmax
- 66.7%
- [S] ÷ Km
- 2.000
Good to know: v = Vmax × [S] ÷ (Km + [S])
What your result means
How saturated the enzyme is
Intermediate. The rate still rises with more substrate, but with diminishing returns.
All the ranges
- Low saturation (0 to 25): The rate is roughly proportional to the substrate: doubling [S] nearly doubles the rate.
- Intermediate (25 to 75): The rate still rises with more substrate, but with diminishing returns.
- Near saturation (75 to 95): Almost every enzyme molecule is busy: more substrate barely helps.
- Saturated (95 or more): At the ceiling (Vmax). The rate is limited by how fast the enzyme works, not by the substrate.
Rough bands for a single substrate at steady state; the rate reaches half of Vmax when [S] equals Km.
The numbers behind this · totals, working, notes
- Substrate for half Vmax
- 2 (= Km)
- Lineweaver–Burk intercept (1/Vmax)
- 0.01
- Lineweaver–Burk intercept (−1/Km)
- -0.5
How it was worked out
v = Vmax × [S] ÷ (Km + [S])
- v = 100 × 4 ÷ (2 + 4) = 66.667
- Describes simple enzyme kinetics with one substrate at steady state. Use the same concentration unit for Km and [S], and the same rate unit for v and Vmax. A low Km means the enzyme reaches half its top speed at a low substrate level.
Rate at other substrate concentrations
Multiples of Km.
| [S] ÷ Km | [S] | Rate v | % of Vmax |
|---|---|---|---|
| 0.1 | 0.2 | 9.091 | 9.1% |
| 0.25 | 0.5 | 20 | 20.0% |
| 0.5 | 1 | 33.33 | 33.3% |
| 1 | 2 | 50 | 50.0% |
| 2 | 4 | 66.67 | 66.7% |
| 4 | 8 | 80 | 80.0% |
| 10 | 20 | 90.91 | 90.9% |
| 20 | 40 | 95.24 | 95.2% |
Lineweaver–Burk (double reciprocal) points
A straight line: slope Km/Vmax, y-intercept 1/Vmax.
| 1/[S] | 1/v |
|---|---|
| 5 | 0.11 |
| 2 | 0.05 |
| 1 | 0.03 |
| 0.5 | 0.02 |
| 0.25 | 0.015 |
| 0.125 | 0.0125 |
| 0.05 | 0.011 |
| 0.025 | 0.0105 |
Please note: For study and planning. Check calculations independently before using results with chemicals, electricity, pressure or machinery, and follow safety data sheets, manufacturer instructions and local regulations.
The idea behind it
Three ideas that explain the Michaelis-Menten calculator
01Saturation
More substrate, diminishing returns
The rate rises quickly at low substrate levels, then flattens as every enzyme molecule is occupied. The ceiling is Vmax.
02Km
The half-speed point
Km is the substrate concentration at which the rate is half of Vmax. It is a rough measure of how well the enzyme grips its substrate.
03Plots
Straightening the curve
Plotting 1/v against 1/[S] turns the curve into a straight line, from which Vmax and Km can be read off.
One enzyme at five substrate concentrations
At a tenth of Km the enzyme is barely working, at Km it runs at half speed, and at ten times Km it is near its ceiling. Here Vmax is 100 and Km is 2.
| Case | Substrate concentration | Relative to Km | Reaction rate | Share of Vmax |
|---|---|---|---|---|
| A tenth of Km | 0.2 | 0.100 | 9.0909 | 9.1% |
| Half of Km | 1 | 0.500 | 33.333 | 33.3% |
| Equal to Km | 2 | 1.000 | 50 | 50.0% |
| Twice Km | 4 | 2.000 | 66.667 | 66.7% |
| Ten times Km | 20 | 10.000 | 90.909 | 90.9% |
Illustrative enzyme with arbitrary units. Real enzymes also vary with temperature and pH.
Vmax, Km and substrate concentration
- Choose rate or substrate needed.
- Enter Vmax and Km, with matching units.
- Enter the substrate concentration, or the target rate.
- Read the result, the saturation curve and the table.
Vmax 100, Km 2, substrate 4
With Vmax = 100 and Km = 2, a substrate concentration of 4 gives v = 100 × 4 ÷ (2 + 4) = 66.7, which is 66.7% of Vmax. A rate of 75 needs [S] = 6.
How the figures are built
Formula
v = Vmax × [S] ÷ (Km + [S])
Expecting the rate to keep rising
- Using different units for Km and [S].
- Expecting the rate to exceed Vmax.
- Confusing Km with a binding constant for all enzymes.
- Applying it to enzymes with cooperative binding.
Enzyme questions
What do Vmax and Km mean?
Vmax is the fastest rate the enzyme can reach when saturated with substrate. Km is the substrate concentration at which the rate is half of Vmax.
What is the Michaelis constant Km?
The substrate concentration at which the reaction rate is half of Vmax. A low Km means the enzyme works well at low substrate levels.
Why does the rate level off?
At high substrate levels every enzyme molecule is busy, so adding more substrate does not speed the reaction. The ceiling is Vmax.
What is a Lineweaver–Burk plot?
A plot of 1/v against 1/[S], which gives a straight line with intercept 1/Vmax and slope Km/Vmax. The table gives the points.
Related tools
- Arrhenius Equation CalculatorFind a rate constant, an activation energy or a new rate at another temperature.
- Linear Regression CalculatorFit a least-squares line to data and predict values.
- Molar Mass CalculatorFind the molar mass of any compound from its formula and see the mass of each element.
- Moles CalculatorConvert between grams and moles, with particle count from Avogadro's constant.
How we calculate this
We use the standard published formula or definition for this calculation, and we show the working so you can check it.
Spotted a mistake? Tell us and we'll check it. How we check our calculators