Skip to content
Convert. Calculate.

Passive House Savings: What Better Insulation Would Save You

The cheapest heat is the heat you never need.

A passive house needs a tiny fraction of the heating of a typical older home.

Your details

Try an example

Units

Result

Currency

Heating saved per year

$1,267

12,667 kWh less bought · 2.32 tonnes less CO₂

Heating bill now
$1,467
After
$200
Heat demand cut
86%
Heating energy you buy each year
  • Now14,667 kWh
  • After2,000 kWh
Image

Good to know: energy bought = floor area × heating demand ÷ system efficiency

What your result means

Heating demand now

High demand. A high figure, often seen in older or poorly insulated buildings, where heating is a large share of energy use.

All the ranges
  • Passive House level (0 to 15): At or below 15 kWh per m² a year: the Passive House Institute's limit for space heating.
  • Deep retrofit level (15 to 25): Up to 25 kWh per m² a year: the EnerPHit limit for refurbished buildings in most climates.
  • Above the standards (25 to 75): Higher than both standards. Better insulation, airtightness and ventilation with heat recovery can bring it down a long way.
  • High demand (75 or more): A high figure, often seen in older or poorly insulated buildings, where heating is a large share of energy use.

The Passive House and EnerPHit limits are published criteria. The wording above them is general; your energy certificate gives your own figure. Source: Passive House Institute criteria.

The numbers behind this · totals, working, notes
Energy bought now
14,667 kWh
Energy bought after
2,000 kWh
Floor area
120 m²

How it was worked out

  1. Heat needed now = 120 m² × 110 = 13,200 kWh a year
  2. Energy bought = heat needed ÷ system efficiency (0.90 for gas boiler)
  3. Saving = (14,667 − 2,000) kWh × price
  • The Passive House Institute's standard asks for a heating demand of no more than 15 kWh per m² a year, plus airtightness and total-energy limits. Your savings depend on how close real use comes to the design figure, and on hot water, cooking and appliances, which are not included.
  • Efficiency values are typical (gas 90%, oil 88%, heat pump 300%); change the price to compare systems fairly.

Savings at other targets

Heating demand after the work, in kWh per m² a year. Your target is highlighted.

TargetHeating billYou saveCO₂ saved
15 kWh/m²$200$1,2672.32 tonnes
30 kWh/m²$400$1,0671.95 tonnes
50 kWh/m²$667$8001.46 tonnes
75 kWh/m²$1,000$467854 kg

The idea behind it

Why the passive house savings calculator gives the answer it does

  • 01Standard

    15 kWh per square metre

    The Passive House standard asks for a space-heating demand of no more than 15 kWh per square metre a year, plus airtight construction and heat-recovery ventilation.

  • 02Heating demand

    Look at your energy certificate

    Your home's heating demand in kWh per m² is often on its energy certificate, or you can estimate it from past bills divided by floor area.

  • 03System

    A heat pump multiplies the saving

    A heat pump delivers about three units of heat per unit of electricity, so the energy you buy falls even further than the demand does.

Five homes, one target of 15 kWh/m²

The leakier the starting house, the larger the saving from the same retrofit. Each row is a 120 m² home heated by gas, with the savings measured against the Passive House target.

Five homes, one target of 15 kWh/m²
HomeDemand nowHeating bill nowSaving per yearHeat demand cut
Recent new build50 kWh/m²$667$46770%
1990s semi-detached100 kWh/m²$1,333$1,13385%
1960s detached150 kWh/m²$2,000$1,80090%
Victorian terrace200 kWh/m²$2,667$2,46793%
Uninsulated stone cottage280 kWh/m²$3,733$3,53395%

Demand figures are typical orders of magnitude, not measurements; your energy certificate gives your own. Costs use the calculator's default fuel price and exclude the cost of the retrofit.

Floor area, demand now and demand after

  1. Enter the heated floor area and your current heating demand in kWh per m² a year.
  2. Leave the target at 15 kWh per m² a year, or enter another figure.
  3. Choose the heating system and enter the price of fuel or electricity.
  4. Add any extra build cost for the payback, then read the savings and the table of other targets.

A 120 m² home cut from 110 to 15 kWh/m²

A 120 m² home using 110 kWh per m² a year with a gas boiler at 0.10 per kWh buys about 14,667 kWh and spends 1,467 a year. At 15 kWh per m² it buys about 2,000 kWh, spends 200 and saves about 1,267 and 2.3 tonnes of CO₂.

What is under the hood

Formula

energy bought = floor area × heating demand ÷ system efficiency

Ignoring the heating system's efficiency

  • Entering the whole energy use instead of space-heating demand.
  • Mixing square feet and square metres.
  • Assuming the design figure is always achieved.
  • Forgetting hot water and appliances stay unchanged.

Passive house questions

What is a Passive House?

A building standard that asks for very low heating demand (no more than 15 kWh per m² a year), achieved with heavy insulation, airtight construction and ventilation with heat recovery.

What is the Passive House standard?

A building standard asking for a space-heating demand of no more than 15 kWh per square metre a year, achieved with heavy insulation, airtight construction and ventilation with heat recovery.

Where do I find my home's heating demand?

On the energy performance certificate, or estimate it from last year's heating energy divided by the floor area.

Does a heat pump change the saving?

Yes. A heat pump delivers about three units of heat per unit of electricity, so you buy much less energy for the same heat.

Related tools

How we calculate this

We use the standard published formula or definition for this calculation, and we show the working so you can check it.

Spotted a mistake? Tell us and we'll check it. How we check our calculators