Skip to content
Convert. Calculate.

Wind Turbine Calculator: Power from Blade Size and Wind Speed

Doubling the blade length does far more than doubling the output.

A wind turbine's output depends on the area its blades sweep and, much more strongly, on the wind speed cubed.

Your details

Try an example

Result

Currency

Power output

5.20 kW

Swept area 78.5 m² · about 10,395 kWh over 2,000 hours at this speed

Power
5.20 kW
Energy at these hours
10,395 kWh
Worth
$1,663
Power grows with the cube of wind speed (ideal curve; real turbines level off at rated speed)
-4.0911.126.341.556.703.757.511.315YouWind speed, m/sPower, kW
Image

Good to know: P = ½ × ρ × A × v³ × Cp × η

What your result means

Power coefficient (Cp)

Typical small turbine. Common for small turbines in real conditions.

All the ranges
  • Low (0 to 0.2): The rotor is capturing little of the wind. Very small or poorly matched turbines are often here.
  • Typical small turbine (0.2 to 0.35): Common for small turbines in real conditions.
  • Good (0.35 to 0.45): Typical of well-designed modern turbines at their best wind speed.
  • Near the limit (0.45 or more): Close to the Betz limit of 0.593. Real turbines rarely exceed about 0.5 once drivetrain losses are counted.

Typical ranges, not guarantees: Cp changes with wind speed and the blade design.

The numbers behind this · totals, working, notes
Power in the wind
16.50 kW
Betz maximum
9.78 kW
Share captured
31.5%
Wind speed
15.7 mph · 25.2 km/h

How it was worked out

P = ½ × ρ × A × v³ × Cp × η

  1. A = π × (10 ÷ 2)² = 78.5 m²
  2. Power in the wind = ½ × 1.225 × 78.5 × 7³ = 16,500 W
  3. Output = 16,500 × Cp 0.35 × η 0.9 = 5,198 W
  • Doubling the wind speed gives eight times the power, so site wind speed matters far more than rotor size. Real turbines start up at about 3 m/s, level off at a rated speed (often 11 to 13 m/s) and shut down in storms.
  • Small turbines on roofs often get much less wind than a mast in the open; wind maps and a measurement campaign give the real figure.

Power at other wind speeds

Same turbine, different wind. Your speed is highlighted.

Wind speedPowerShare of yours
3 m/s409 W8%
4 m/s970 W19%
5 m/s1.89 kW36%
6 m/s3.27 kW63%
7 m/s5.20 kW100%
8 m/s7.76 kW149%
10 m/s15.15 kW292%
12 m/s26.18 kW504%

The idea behind it

The idea behind the wind turbine calculator

  • 01Cube law

    Double the wind, eight times the power

    Power depends on the cube of wind speed. A site with 7 m/s winds yields almost three times as much as one with 5 m/s.

  • 02Betz limit

    No turbine captures more than 59%

    Physics limits any turbine to 59.3 percent of the wind's power. Good large turbines reach about 45 percent; small ones usually less.

  • 03Siting

    Roof wind is weak and turbulent

    Small roof turbines often get far less wind than a tall mast in open ground. Measure the wind at the site before relying on the numbers.

Five turbine sizes, each in a typical wind

Swept area grows with the square of the rotor diameter, so a rotor ten times wider catches a hundred times as much wind. Here are five illustrative machines, each in a wind speed typical of where that size is built, using the calculator's default efficiency.

Five turbine sizes, each in a typical wind
TurbineRotor diameterWind speedPower outputEnergy at 2,000 hours
Garden micro turbine1.5 m5 m/s43 W85 kWh
Small farm turbine10 m7 m/s5.20 kW10,395 kWh
Community turbine50 m8 m/s193.96 kW387,924 kWh
Onshore utility turbine100 m9 m/s1,104.67 kW2,209,348 kWh
Offshore turbine164 m10 m/s4,075.63 kW8,151,250 kWh

A simple model with a fixed power coefficient, not manufacturer data: real turbines have power curves that cap at a rated speed. Rotor sizes are illustrative.

Rotor diameter, wind speed and efficiency

  1. Enter the rotor diameter in metres and the wind speed in metres per second.
  2. Leave the power coefficient at 0.35 or enter your turbine's figure (maximum 0.593).
  3. Enter generator efficiency, air density and the hours a year at that wind speed.
  4. Read the power, the energy and the power curve.

A 10 m rotor in a 7 m/s wind

A 10 m rotor sweeps 78.5 m². In a 7 m/s wind with Cp 0.35, 90% efficiency and air density 1.225 it makes about 5.2 kW, and about 10,400 kWh over 2,000 hours at that speed.

Method and reference points

Formula

P = ½ × ρ × A × v³ × Cp × η

Using the average wind speed for the cubed term

  • Using miles per hour or km/h instead of metres per second.
  • Entering the radius where the diameter is asked.
  • Using average wind speed for the whole year (power depends on speed cubed).
  • Setting Cp above the Betz limit of 0.593.

Wind power questions

Why does wind speed matter so much?

Power depends on the cube of wind speed, so doubling the wind gives eight times the power. A modest increase in average wind speed can transform a turbine's output.

How much power does a wind turbine make?

Power = ½ × air density × swept area × wind speed³ × Cp × efficiency. For a 10 m rotor in a 7 m/s wind it is about 5 kW.

What is the Betz limit?

The theoretical maximum share of the wind's power any turbine can capture, 59.3%. Real turbines reach about 35% to 45%.

Why does the wind speed matter so much?

Power depends on the cube of wind speed, so a 10% faster wind gives about 33% more power. Site wind speed is the most important factor in a turbine's output.

Learn more

Related tools

How we calculate this

We use the standard published formula or definition for this calculation, and we show the working so you can check it.

Spotted a mistake? Tell us and we'll check it. How we check our calculators