Skip to content
Convert. Calculate.

Guide· Kitchen math

How to scale a recipe up or down without ruining it

Multiply every amount by the servings you want divided by the servings the recipe makes. Going from 4 servings to 10 turns 250 g into 625 g, a factor of 2.5.

Published · 4 min · By the Convert & Calculate team

Try it: Recipe Scaler

Open the full tool

Your details

Try an example

Result

Scaled amount

625

Scale factor
× 2.5
Original amount
250
Scaled amount
625
Image

Good to know: new = amount × (servings wanted ÷ recipe servings)

How it was worked out · notes
  1. new amount = amount × (servings wanted ÷ servings in recipe)
  • Scale spices, salt and raising agents more cautiously for big changes (above about 2×), and check cooking times and pan sizes: they rarely scale in step.

The same ingredient for other numbers of servings

Your amount of 250 is for 4 servings. Your target is highlighted.

ServingsAmountScale factor
2125× 0.5
4250× 1
6375× 1.5
8500× 2
10625× 2.5
12750× 3
161,000× 4
201,250× 5

The one sum

Divide the servings you want by the servings the recipe makes. That is your scale factor. Multiply every amount in the recipe by it. A recipe for 4 that you need for 10 has a factor of 10 ÷ 4 = × 2.5, so 250 g of flour becomes 625 g.

The same sum runs downwards. Cut the recipe for 4 to 2 servings and the factor is × 0.5, so 250 g becomes 125 g.

250 g in a recipe for 4 servings, scaled to other numbers of servings
ServingsAmount (g)Scale factor
2125× 0.5
6375× 1.5
8500× 2
10625× 2.5
12750× 3
161,000× 4

When the factor is not a neat number

A recipe for 6 that has to serve 8 has a factor of 8 ÷ 6, or × 1.333, so 300 g becomes 400 g. Do the sum on every ingredient, then round to amounts you can measure.

What does not scale in step

  • Spices, salt and raising agents. For big changes, above about 2×, scale them more cautiously and taste or test as you go.
  • Cooking time. A bigger batch in a deeper dish takes longer, and a smaller one cooks faster. Start checking early rather than trusting the original time.
  • Whole eggs. If the factor leaves you with half an egg, beat one, then measure out the share you need.
  • Pan size. The batter has to fit a pan of the right size, or it bakes too thick or too thin.

Scaling for the pan instead of the servings

Sometimes the pan is the problem rather than the guests. Pan area is what counts: a 9-inch round pan has an area of 63.6 in², and an 8-inch square pan has 64.0 in². They are almost the same, so the recipe needs a factor of only × 1.01.

Our pan size converter works out the factor for any two pans, round, square or rectangular. If the new pan is bigger, the batter spreads thinner and bakes faster, so check a few minutes early.

Weigh rather than measure by volume

Scaling is more reliable in grams than in cups, because cup amounts of flour vary with how you scoop. Our ingredient converter turns cups into grams before you scale.

Run your own numbers with the Recipe Scaler tool.

Related tools

Keep reading